Dominate with a Dynamic Duo

Introducing our THUMB REST Takedown Lever & OFFSET Extended Mag Release

Master Recoil

The Align Tactical® THUMB REST TAKEDOWN LEVER integrates an ergonomic ledge for the support hand's thumb to firmly lock down against, serving as a brake against muzzle flip to provide the fastest follow-up sight picture. Increased surface contact with the pistol reduces support hand slippage while providing an index point for a consistent high thumbs-forward grip. Swaps in seconds to offer maximum control and speed in Sig Sauer® P320® (M17/M18)® pistols for a competitive edge.

Secure Design

Complementing the P320® compatible takedown lever is a thumb rest that extends 30 degrees forward of the center of rotation, directing applied pressure (counter clockwise) towards the over-travel stop to rigidly remain locked in place. When used in the opposite direction (clockwise) for disassembly, rotation is easy with a simple pinch and turn of the ledge.

Ergonomics

Establishing a two-handed grip creates a naturally angled cant of one’s support hand thumb. Incorporating a secondary receiving slope of 15 degrees allows for evenly distributed thumb pressure and serves as a guide for settling into proper contact position (with the center of the thumb’s pad “finger print” flatly pressed to the rest).

Balanced Approach

The Align Tactical® THUMB REST TAKEDOWN LEVER protrudes 0.4 inches (10mm) from the grip module for a comfortably slim footprint that creates approximately half a thumb width of effective resistance area. Horizontal serrations offer excellent traction against recoiling muzzle rise without being abrasive. Perfectly sized with aesthetics to match.

 

USPSA Production Approved

Are you ready?” for clearing stages faster than ever with your P320®? Upgrade to the ultimate performance components for USPSA production* class and above.

*Per Section 21.6 - Exchange of minor EXTERNAL components, our takedown lever received USPSA NROI validation under the classification and definition of approved “pins” being comprised of a cylindrical shaft that traverses through the pistol to hold things together, such as the slide assembly to the lower.

**IDPA International body validated for ESP and Carry Optics Divisions

Rise to the Top

Starting stages with a tabled pistol can make it challenging to get a grip, so we’ve given you hand. Unloaded (without magazine), the ledge wedges a lightened pistol grip into the air for unobstructed grabbing, leaving the competition grounded. Inserting a magazine drops the grip back down and shields the OFFSET Extended Magazine Release from being pressed by raising it off the table.

 

Hardened S7 Tool Steel

We selected the toughest shock-resisting steel and then hardened it for maximum strength and durability.

Compatible Holster Manufacturers

Coming Soon* Listings

*These manufacturers have tested and validated compatibility with Align Tactical performance components for select holsters in their existing product line. This may also refer to slight mold enhancements being completed and/or pending website modifications that clearly reference Align Tactical products. Contact manufacturer directly for additional details in regards to purchasing.

  • Add an OFFSET

  • Learn about the OFFSET Extended Magazine Release

Add an OFFSET

Learn about the OFFSET Extended Magazine Release Shop Now